Series Circuit JAVA Troubleshooting Simulation #1
In the circuit below use the "No Fault" condition as a base line to determine which resistor has failed or changed value in each faulty circuit( Fault 1 thru Fault 4.) Then check your result by clicking "Answer" at bottom of page and compare resistor values with those given with =schematic.
Vs 10.0 Vdc Rs =
R1 = R2 = R3 = R4 = 1.00 ohm
Why should you learn to troubleshoot simple series circuits in the age of integrated circuits?
ASIC (Application Specific Integrated Circuit)
The picture below shows both discrete and ASIC components. Actually it is a stock photo and I am not familiar with the circuit.